sdparm - List or change SCSI/SATA disk parameters

Description:

SCSI disk parameters are held in mode pages. This utility lists or
changes those parameters. Other SCSI devices (or devices that use the
SCSI command set e.g. some SATA devices) such as CD/DVD and tape
drives may also find parts of sdparm useful. Requires the linux kernel
2.4 series or later. In the 2.6 series any device node the understands
a SCSI command set may be used (e.g. /dev/sda). In the 2.4 series SCSI
device node may be used.

Fetches Vital Product Data pages. Can send commands to start or stop
the media and load or unload removable media.

Warning: It is possible (but unlikely) to change SCSI disk settings
such that the disk stops operating or is slowed down. Use with care.

Homepage: http://www.torque.net/sg/sdparm.html

License: BSD

Vendor: Fedora Project

Packages

sdparm-1.01-3.fc8.i386 [91 KiB] Changelog by Terje Rosten (2007-08-28):
- Rebuild