guestfs - Library for accessing and modifying virtual machine images
#include <guestfs.h>
guestfs_h *handle = guestfs_create (); guestfs_add_drive (handle, "guest.img"); guestfs_launch (handle); guestfs_mount (handle, "/dev/sda1", "/"); guestfs_touch (handle, "/hello"); guestfs_sync (handle); guestfs_close (handle);
Libguestfs is a library for accessing and modifying guest disk images. Amongst the things this is good for: making batch configuration changes to guests, getting disk used/free statistics (see also: virt-df), migrating between virtualization systems (see also: virt-p2v), performing partial backups, performing partial guest clones, cloning guests and changing registry/UUID/hostname info, and much else besides.
Libguestfs uses Linux kernel and qemu code, and can access any type of guest filesystem that Linux and qemu can, including but not limited to: ext2/3/4, btrfs, FAT and NTFS, LVM, many different disk partition schemes, qcow, qcow2, vmdk.
Libguestfs provides ways to enumerate guest storage (eg. partitions, LVs, what filesystem is in each LV, etc.). It can also run commands in the context of the guest. Also you can access filesystems over FTP.
Libguestfs is a library that can be linked with C and C++ management programs (or management programs written in OCaml, Perl, Python, Ruby, Java or Haskell). You can also use it from shell scripts or the command line.
You don't need to be root to use libguestfs, although obviously you do need enough permissions to access the disk images.
If you are using the high-level API, then you should call the functions in the following order:
guestfs_h *handle = guestfs_create ();
guestfs_add_drive (handle, "guest.img"); /* call guestfs_add_drive additional times if the guest has * multiple disks */
guestfs_launch (handle);
/* now you can examine what partitions, LVs etc are available * you have to mount / at least */ guestfs_mount (handle, "/dev/sda1", "/");
/* now you can perform actions on the guest disk image */ guestfs_touch (handle, "/hello");
/* you only need to call guestfs_sync if you have made * changes to the guest image */ guestfs_sync (handle);
guestfs_close (handle);
guestfs_launch and all of the actions including guestfs_sync
are blocking calls. You can use the low-level event API to do
non-blocking operations instead.
All functions that return integers, return -1 on error. See
section ERROR HANDLING below for how to handle errors.
guestfs_h is the opaque type representing a connection handle.
Create a handle by calling guestfs_create. Call guestfs_close
to free the handle and release all resources used.
For information on using multiple handles and threads, see the section MULTIPLE HANDLES AND MULTIPLE THREADS below.
guestfs_h *guestfs_create (void);
Create a connection handle.
You have to call guestfs_add_drive on the handle at least once.
This function returns a non-NULL pointer to a handle on success or NULL on error.
After configuring the handle, you have to call guestfs_launch.
You may also want to configure error handling for the handle. See ERROR HANDLING section below.
void guestfs_close (guestfs_h *handle);
This closes the connection handle and frees up all resources used.
The convention in all functions that return int is that they return
-1 to indicate an error. You can get additional information on
errors by calling guestfs_last_error and/or by setting up an error
handler with guestfs_set_error_handler.
The default error handler prints the information string to stderr.
Out of memory errors are handled differently. The default action is
to call abort(3). If this is undesirable, then you can set a
handler using guestfs_set_out_of_memory_handler.
const char *guestfs_last_error (guestfs_h *handle);
This returns the last error message that happened on handle. If
there has not been an error since the handle was created, then this
returns NULL.
The lifetime of the returned string is until the next error occurs, or
guestfs_close is called.
The error string is not localized (ie. is always in English), because this makes searching for error messages in search engines give the largest number of results.
typedef void (*guestfs_error_handler_cb) (guestfs_h *handle,
void *data,
const char *msg);
void guestfs_set_error_handler (guestfs_h *handle,
guestfs_error_handler_cb cb,
void *data);
The callback cb will be called if there is an error. The
parameters passed to the callback are an opaque data pointer and the
error message string.
Note that the message string msg is freed as soon as the callback
function returns, so if you want to stash it somewhere you must make
your own copy.
The default handler prints messages on stderr.
If you set cb to NULL then no handler is called.
guestfs_error_handler_cb guestfs_get_error_handler (guestfs_h *handle,
void **data_rtn);
Returns the current error handler callback.
typedef void (*guestfs_abort_cb) (void);
int guestfs_set_out_of_memory_handler (guestfs_h *handle,
guestfs_abort_cb);
The callback cb will be called if there is an out of memory
situation. Note this callback must not return.
The default is to call abort(3).
You cannot set cb to NULL. You can't ignore out of memory
situations.
guestfs_abort_fn guestfs_get_out_of_memory_handler (guestfs_h *handle);
This returns the current out of memory handler.
Libguestfs needs a kernel and initrd.img, which it finds by looking along an internal path.
By default it looks for these in the directory $libdir/guestfs
(eg. /usr/local/lib/guestfs or /usr/lib64/guestfs).
Use guestfs_set_path or set the environment variable
LIBGUESTFS_PATH to change the directories that libguestfs will
search in. The value is a colon-separated list of paths. The current
directory is not searched unless the path contains an empty element
or .. For example LIBGUESTFS_PATH=:/usr/lib/guestfs would
search the current directory and then /usr/lib/guestfs.
This section provides additional documentation for groups of API calls, which may not be obvious from reading about the individual calls below.
Libguestfs provides access to a large part of the LVM2 API. It won't make much sense unless you familiarize yourself with the concepts of physical volumes, volume groups and logical volumes.
This author strongly recommends reading the LVM HOWTO, online at http://tldp.org/HOWTO/LVM-HOWTO/.
To create MBR-style (ie. normal PC) partitions use one of the
guestfs_sfdisk* variants. These calls use the external
sfdisk(8) command.
The simplest call is:
char *lines[] = { ",", NULL };
guestfs_sfdiskM (g, "/dev/sda", lines);
This will create a single partition on /dev/sda called
/dev/sda1 covering the whole disk.
In general MBR partitions are both unnecessarily complicated and
depend on archaic details, namely the Cylinder-Head-Sector (CHS)
geometry of the disk. guestfs_sfdiskM allows you to specify sizes
in megabytes instead of cylinders, which is a small win.
guestfs_sfdiskM will choose the nearest cylinder to approximate the
requested size. There's a lot of crazy stuff to do with IDE and
virtio disks having different, incompatible CHS geometries, that you
probably don't want to know about. My advice: make a single partition
to cover the whole disk, then use LVM on top.
In future we aim to provide access to libparted.
For small, single files, use guestfs_write_file. In some versions
of libguestfs there was a bug which limited this call to text files
(not containing ASCII NUL characters).
To upload a single file, use guestfs_upload. This call has no
limits on file content or size (even files larger than 4 GB).
To upload multiple files, see guestfs_tar_in and guestfs_tgz_in.
However the fastest way to upload large numbers of arbitrary files
is to turn them into a squashfs or CD ISO (see mksquashfs(8) and
mkisofs(8)), then attach this using guestfs_add_drive_ro. If
you add the drive in a predictable way (eg. adding it last after all
other drives) then you can get the device name from
guestfs_list_devices and mount it directly using
guestfs_mount_ro. Note that squashfs images are sometimes
non-portable between kernel versions, and they don't support labels or
UUIDs. If you want to pre-build an image or you need to mount it
using a label or UUID, use an ISO image instead.
Use guestfs_cat to download small, text only files. This call
is limited to files which are less than 2 MB and which cannot contain
any ASCII NUL (\0) characters. However it has a very simple
to use API.
guestfs_read_file can be used to read files which contain
arbitrary 8 bit data, since it returns a (pointer, size) pair.
However it is still limited to "small" files, less than 2 MB.
guestfs_download can be used to download any file, with no
limits on content or size (even files larger than 4 GB).
To download multiple files, see guestfs_tar_out and
guestfs_tgz_out.
Although libguestfs is a primarily an API for manipulating files inside guest images, we also provide some limited facilities for running commands inside guests.
There are many limitations to this:
The kernel version that the command runs under will be different from what it expects.
If the command needs to communicate with daemons, then most likely they won't be running.
The command will be running in limited memory.
Only supports Linux guests (not Windows, BSD, etc).
Architecture limitations (eg. won't work for a PPC guest on an X86 host).
For SELinux guests, you may need to enable SELinux and load policy first. See SELINUX in this manpage.
The two main API calls to run commands are guestfs_command and
guestfs_sh (there are also variations).
The difference is that guestfs_sh runs commands using the shell, so
any shell globs, redirections, etc will work.
guestfs_ll is just designed for humans to read (mainly when using
the guestfish(1)-equivalent command ll).
guestfs_ls is a quick way to get a list of files in a directory
from programs.
guestfs_readdir is a programmatic way to get a list of files in a
directory, plus additional information about each one.
guestfs_find can be used to recursively list files.
We support SELinux guests. To ensure that labeling happens correctly in SELinux guests, you need to enable SELinux and load the guest's policy:
Before launching, do:
guestfs_set_selinux (g, 1);
After mounting the guest's filesystem(s), load the policy. This is best done by running the load_policy(8) command in the guest itself:
guestfs_sh (g, "/usr/sbin/load_policy");
(Older versions of load_policy require you to specify the
name of the policy file).
Optionally, set the security context for the API. The correct security context to use can only be known by inspecting the guest. As an example:
guestfs_setcon (g, "unconfined_u:unconfined_r:unconfined_t:s0");
This will work for running commands and editing existing files.
When new files are created, you may need to label them explicitly,
for example by running the external command
restorecon pathname.
We guarantee the libguestfs ABI (binary interface), for public, high-level actions as outlined in this section. Although we will deprecate some actions, for example if they get replaced by newer calls, we will keep the old actions forever. This allows you the developer to program in confidence against libguestfs.
int guestfs_add_cdrom (guestfs_h *handle,
const char *filename);
This function adds a virtual CD-ROM disk image to the guest.
This is equivalent to the qemu parameter -cdrom filename.
Note that this call checks for the existence of filename. This
stops you from specifying other types of drive which are supported
by qemu such as nbd: and http: URLs. To specify those, use
the general guestfs_config call instead.
This function returns 0 on success or -1 on error.
int guestfs_add_drive (guestfs_h *handle,
const char *filename);
This function adds a virtual machine disk image filename to the
guest. The first time you call this function, the disk appears as IDE
disk 0 (/dev/sda) in the guest, the second time as /dev/sdb, and
so on.
You don't necessarily need to be root when using libguestfs. However you obviously do need sufficient permissions to access the filename for whatever operations you want to perform (ie. read access if you just want to read the image or write access if you want to modify the image).
This is equivalent to the qemu parameter
-drive file=filename,cache=off,if=....
cache=off is omitted in cases where it is not supported by
the underlying filesystem.
Note that this call checks for the existence of filename. This
stops you from specifying other types of drive which are supported
by qemu such as nbd: and http: URLs. To specify those, use
the general guestfs_config call instead.
This function returns 0 on success or -1 on error.
int guestfs_add_drive_ro (guestfs_h *handle,
const char *filename);
This adds a drive in snapshot mode, making it effectively read-only.
Note that writes to the device are allowed, and will be seen for the duration of the guestfs handle, but they are written to a temporary file which is discarded as soon as the guestfs handle is closed. We don't currently have any method to enable changes to be committed, although qemu can support this.
This is equivalent to the qemu parameter
-drive file=filename,snapshot=on,if=....
Note that this call checks for the existence of filename. This
stops you from specifying other types of drive which are supported
by qemu such as nbd: and http: URLs. To specify those, use
the general guestfs_config call instead.
This function returns 0 on success or -1 on error.
int guestfs_aug_close (guestfs_h *handle);
Close the current Augeas handle and free up any resources
used by it. After calling this, you have to call
guestfs_aug_init again before you can use any other
Augeas functions.
This function returns 0 on success or -1 on error.
struct guestfs_int_bool *guestfs_aug_defnode (guestfs_h *handle,
const char *name,
const char *expr,
const char *val);
Defines a variable name whose value is the result of
evaluating expr.
If expr evaluates to an empty nodeset, a node is created,
equivalent to calling guestfs_aug_set expr, value.
name will be the nodeset containing that single node.
On success this returns a pair containing the number of nodes in the nodeset, and a boolean flag if a node was created.
This function returns a struct guestfs_int_bool *,
or NULL if there was an error.
The caller must call guestfs_free_int_bool after use.
int guestfs_aug_defvar (guestfs_h *handle,
const char *name,
const char *expr);
Defines an Augeas variable name whose value is the result
of evaluating expr. If expr is NULL, then name is
undefined.
On success this returns the number of nodes in expr, or
0 if expr evaluates to something which is not a nodeset.
On error this function returns -1.
char *guestfs_aug_get (guestfs_h *handle,
const char *augpath);
Look up the value associated with path. If path
matches exactly one node, the value is returned.
This function returns a string, or NULL on error. The caller must free the returned string after use.
int guestfs_aug_init (guestfs_h *handle,
const char *root,
int flags);
Create a new Augeas handle for editing configuration files. If there was any previous Augeas handle associated with this guestfs session, then it is closed.
You must call this before using any other guestfs_aug_*
commands.
root is the filesystem root. root must not be NULL,
use / instead.
The flags are the same as the flags defined in <augeas.h>, the logical or of the following integers:
AUG_SAVE_BACKUP = 1Keep the original file with a .augsave extension.
AUG_SAVE_NEWFILE = 2Save changes into a file with extension .augnew, and
do not overwrite original. Overrides AUG_SAVE_BACKUP.
AUG_TYPE_CHECK = 4Typecheck lenses (can be expensive).
AUG_NO_STDINC = 8Do not use standard load path for modules.
AUG_SAVE_NOOP = 16Make save a no-op, just record what would have been changed.
AUG_NO_LOAD = 32Do not load the tree in guestfs_aug_init.
To close the handle, you can call guestfs_aug_close.
To find out more about Augeas, see http://augeas.net/.
This function returns 0 on success or -1 on error.
int guestfs_aug_insert (guestfs_h *handle,
const char *augpath,
const char *label,
int before);
Create a new sibling label for path, inserting it into
the tree before or after path (depending on the boolean
flag before).
path must match exactly one existing node in the tree, and
label must be a label, ie. not contain /, * or end
with a bracketed index [N].
This function returns 0 on success or -1 on error.
int guestfs_aug_load (guestfs_h *handle);
Load files into the tree.
See aug_load in the Augeas documentation for the full gory
details.
This function returns 0 on success or -1 on error.
char **guestfs_aug_ls (guestfs_h *handle,
const char *augpath);
This is just a shortcut for listing guestfs_aug_match
path/* and sorting the resulting nodes into alphabetical order.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
char **guestfs_aug_match (guestfs_h *handle,
const char *augpath);
Returns a list of paths which match the path expression path.
The returned paths are sufficiently qualified so that they match
exactly one node in the current tree.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
int guestfs_aug_mv (guestfs_h *handle,
const char *src,
const char *dest);
Move the node src to dest. src must match exactly
one node. dest is overwritten if it exists.
This function returns 0 on success or -1 on error.
int guestfs_aug_rm (guestfs_h *handle,
const char *augpath);
Remove path and all of its children.
On success this returns the number of entries which were removed.
On error this function returns -1.
int guestfs_aug_save (guestfs_h *handle);
This writes all pending changes to disk.
The flags which were passed to guestfs_aug_init affect exactly
how files are saved.
This function returns 0 on success or -1 on error.
int guestfs_aug_set (guestfs_h *handle,
const char *augpath,
const char *val);
Set the value associated with path to value.
This function returns 0 on success or -1 on error.
int guestfs_blockdev_flushbufs (guestfs_h *handle,
const char *device);
This tells the kernel to flush internal buffers associated
with device.
This uses the blockdev(8) command.
This function returns 0 on success or -1 on error.
int guestfs_blockdev_getbsz (guestfs_h *handle,
const char *device);
This returns the block size of a device.
(Note this is different from both size in blocks and filesystem block size).
This uses the blockdev(8) command.
On error this function returns -1.
int guestfs_blockdev_getro (guestfs_h *handle,
const char *device);
Returns a boolean indicating if the block device is read-only (true if read-only, false if not).
This uses the blockdev(8) command.
This function returns a C truth value on success or -1 on error.
int64_t guestfs_blockdev_getsize64 (guestfs_h *handle,
const char *device);
This returns the size of the device in bytes.
See also guestfs_blockdev_getsz.
This uses the blockdev(8) command.
On error this function returns -1.
int guestfs_blockdev_getss (guestfs_h *handle,
const char *device);
This returns the size of sectors on a block device. Usually 512, but can be larger for modern devices.
(Note, this is not the size in sectors, use guestfs_blockdev_getsz
for that).
This uses the blockdev(8) command.
On error this function returns -1.
int64_t guestfs_blockdev_getsz (guestfs_h *handle,
const char *device);
This returns the size of the device in units of 512-byte sectors (even if the sectorsize isn't 512 bytes ... weird).
See also guestfs_blockdev_getss for the real sector size of
the device, and guestfs_blockdev_getsize64 for the more
useful size in bytes.
This uses the blockdev(8) command.
On error this function returns -1.
int guestfs_blockdev_rereadpt (guestfs_h *handle,
const char *device);
Reread the partition table on device.
This uses the blockdev(8) command.
This function returns 0 on success or -1 on error.
int guestfs_blockdev_setbsz (guestfs_h *handle,
const char *device,
int blocksize);
This sets the block size of a device.
(Note this is different from both size in blocks and filesystem block size).
This uses the blockdev(8) command.
This function returns 0 on success or -1 on error.
int guestfs_blockdev_setro (guestfs_h *handle,
const char *device);
Sets the block device named device to read-only.
This uses the blockdev(8) command.
This function returns 0 on success or -1 on error.
int guestfs_blockdev_setrw (guestfs_h *handle,
const char *device);
Sets the block device named device to read-write.
This uses the blockdev(8) command.
This function returns 0 on success or -1 on error.
char *guestfs_cat (guestfs_h *handle,
const char *path);
Return the contents of the file named path.
Note that this function cannot correctly handle binary files
(specifically, files containing \0 character which is treated
as end of string). For those you need to use the guestfs_read_file
or guestfs_download functions which have a more complex interface.
This function returns a string, or NULL on error. The caller must free the returned string after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char *guestfs_checksum (guestfs_h *handle,
const char *csumtype,
const char *path);
This call computes the MD5, SHAx or CRC checksum of the
file named path.
The type of checksum to compute is given by the csumtype
parameter which must have one of the following values:
crcCompute the cyclic redundancy check (CRC) specified by POSIX
for the cksum command.
md5Compute the MD5 hash (using the md5sum program).
sha1Compute the SHA1 hash (using the sha1sum program).
sha224Compute the SHA224 hash (using the sha224sum program).
sha256Compute the SHA256 hash (using the sha256sum program).
sha384Compute the SHA384 hash (using the sha384sum program).
sha512Compute the SHA512 hash (using the sha512sum program).
The checksum is returned as a printable string.
This function returns a string, or NULL on error. The caller must free the returned string after use.
int guestfs_chmod (guestfs_h *handle,
int mode,
const char *path);
Change the mode (permissions) of path to mode. Only
numeric modes are supported.
This function returns 0 on success or -1 on error.
int guestfs_chown (guestfs_h *handle,
int owner,
int group,
const char *path);
Change the file owner to owner and group to group.
Only numeric uid and gid are supported. If you want to use names, you will need to locate and parse the password file yourself (Augeas support makes this relatively easy).
This function returns 0 on success or -1 on error.
char *guestfs_command (guestfs_h *handle,
char *const *arguments);
This call runs a command from the guest filesystem. The filesystem must be mounted, and must contain a compatible operating system (ie. something Linux, with the same or compatible processor architecture).
The single parameter is an argv-style list of arguments.
The first element is the name of the program to run.
Subsequent elements are parameters. The list must be
non-empty (ie. must contain a program name). Note that
the command runs directly, and is not invoked via
the shell (see guestfs_sh).
The return value is anything printed to stdout by the command.
If the command returns a non-zero exit status, then this function returns an error message. The error message string is the content of stderr from the command.
The $PATH environment variable will contain at least
/usr/bin and /bin. If you require a program from
another location, you should provide the full path in the
first parameter.
Shared libraries and data files required by the program must be available on filesystems which are mounted in the correct places. It is the caller's responsibility to ensure all filesystems that are needed are mounted at the right locations.
This function returns a string, or NULL on error. The caller must free the returned string after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_command_lines (guestfs_h *handle,
char *const *arguments);
This is the same as guestfs_command, but splits the
result into a list of lines.
See also: guestfs_sh_lines
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
int guestfs_config (guestfs_h *handle,
const char *qemuparam,
const char *qemuvalue);
This can be used to add arbitrary qemu command line parameters
of the form -param value. Actually it's not quite arbitrary - we
prevent you from setting some parameters which would interfere with
parameters that we use.
The first character of param string must be a - (dash).
value can be NULL.
This function returns 0 on success or -1 on error.
int guestfs_cp (guestfs_h *handle,
const char *src,
const char *dest);
This copies a file from src to dest where dest is
either a destination filename or destination directory.
This function returns 0 on success or -1 on error.
int guestfs_cp_a (guestfs_h *handle,
const char *src,
const char *dest);
This copies a file or directory from src to dest
recursively using the cp -a command.
This function returns 0 on success or -1 on error.
char *guestfs_debug (guestfs_h *handle,
const char *subcmd,
char *const *extraargs);
The guestfs_debug command exposes some internals of
guestfsd (the guestfs daemon) that runs inside the
qemu subprocess.
There is no comprehensive help for this command. You have
to look at the file daemon/debug.c in the libguestfs source
to find out what you can do.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char *guestfs_df (guestfs_h *handle);
This command runs the df command to report disk space used.
This command is mostly useful for interactive sessions. It
is not intended that you try to parse the output string.
Use statvfs from programs.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char *guestfs_df_h (guestfs_h *handle);
This command runs the df -h command to report disk space used
in human-readable format.
This command is mostly useful for interactive sessions. It
is not intended that you try to parse the output string.
Use statvfs from programs.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char *guestfs_dmesg (guestfs_h *handle);
This returns the kernel messages (dmesg output) from
the guest kernel. This is sometimes useful for extended
debugging of problems.
Another way to get the same information is to enable
verbose messages with guestfs_set_verbose or by setting
the environment variable LIBGUESTFS_DEBUG=1 before
running the program.
This function returns a string, or NULL on error. The caller must free the returned string after use.
int guestfs_download (guestfs_h *handle,
const char *remotefilename,
const char *filename);
Download file remotefilename and save it as filename
on the local machine.
filename can also be a named pipe.
See also guestfs_upload, guestfs_cat.
This function returns 0 on success or -1 on error.
int guestfs_drop_caches (guestfs_h *handle,
int whattodrop);
This instructs the guest kernel to drop its page cache,
and/or dentries and inode caches. The parameter whattodrop
tells the kernel what precisely to drop, see
http://linux-mm.org/Drop_Caches
Setting whattodrop to 3 should drop everything.
This automatically calls sync(2) before the operation, so that the maximum guest memory is freed.
This function returns 0 on success or -1 on error.
int64_t guestfs_du (guestfs_h *handle,
const char *path);
This command runs the du -s command to estimate file space
usage for path.
path can be a file or a directory. If path is a directory
then the estimate includes the contents of the directory and all
subdirectories (recursively).
The result is the estimated size in kilobytes (ie. units of 1024 bytes).
On error this function returns -1.
int guestfs_e2fsck_f (guestfs_h *handle,
const char *device);
This runs e2fsck -p -f device, ie. runs the ext2/ext3
filesystem checker on device, noninteractively (-p),
even if the filesystem appears to be clean (-f).
This command is only needed because of guestfs_resize2fs
(q.v.). Normally you should use guestfs_fsck.
This function returns 0 on success or -1 on error.
char *guestfs_echo_daemon (guestfs_h *handle,
char *const *words);
This command concatenate the list of words passed with single spaces between
them and returns the resulting string.
You can use this command to test the connection through to the daemon.
See also guestfs_ping_daemon.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char **guestfs_egrep (guestfs_h *handle,
const char *regex,
const char *path);
This calls the external egrep program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_egrepi (guestfs_h *handle,
const char *regex,
const char *path);
This calls the external egrep -i program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
int guestfs_equal (guestfs_h *handle,
const char *file1,
const char *file2);
This compares the two files file1 and file2 and returns
true if their content is exactly equal, or false otherwise.
The external cmp(1) program is used for the comparison.
This function returns a C truth value on success or -1 on error.
int guestfs_exists (guestfs_h *handle,
const char *path);
This returns true if and only if there is a file, directory
(or anything) with the given path name.
See also guestfs_is_file, guestfs_is_dir, guestfs_stat.
This function returns a C truth value on success or -1 on error.
int guestfs_fallocate (guestfs_h *handle,
const char *path,
int len);
This command preallocates a file (containing zero bytes) named
path of size len bytes. If the file exists already, it
is overwritten.
Do not confuse this with the guestfish-specific
alloc command which allocates a file in the host and
attaches it as a device.
This function returns 0 on success or -1 on error.
char **guestfs_fgrep (guestfs_h *handle,
const char *pattern,
const char *path);
This calls the external fgrep program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_fgrepi (guestfs_h *handle,
const char *pattern,
const char *path);
This calls the external fgrep -i program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char *guestfs_file (guestfs_h *handle,
const char *path);
This call uses the standard file(1) command to determine the type or contents of the file. This also works on devices, for example to find out whether a partition contains a filesystem.
This call will also transparently look inside various types of compressed file.
The exact command which runs is file -zbsL path. Note in
particular that the filename is not prepended to the output
(the -b option).
This function returns a string, or NULL on error. The caller must free the returned string after use.
char **guestfs_find (guestfs_h *handle,
const char *directory);
This command lists out all files and directories, recursively,
starting at directory. It is essentially equivalent to
running the shell command find directory -print but some
post-processing happens on the output, described below.
This returns a list of strings without any prefix. Thus if the directory structure was:
/tmp/a /tmp/b /tmp/c/d
then the returned list from guestfs_find /tmp would be
4 elements:
a b c c/d
If directory is not a directory, then this command returns
an error.
The returned list is sorted.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
int guestfs_fsck (guestfs_h *handle,
const char *fstype,
const char *device);
This runs the filesystem checker (fsck) on device which
should have filesystem type fstype.
The returned integer is the status. See fsck(8) for the
list of status codes from fsck.
Notes:
Multiple status codes can be summed together.
A non-zero return code can mean "success", for example if errors have been corrected on the filesystem.
Checking or repairing NTFS volumes is not supported (by linux-ntfs).
This command is entirely equivalent to running fsck -a -t fstype device.
On error this function returns -1.
const char *guestfs_get_append (guestfs_h *handle);
Return the additional kernel options which are added to the guest kernel command line.
If NULL then no options are added.
This function returns a string which may be NULL. There is way to return an error from this function. The string is owned by the guest handle and must not be freed.
int guestfs_get_autosync (guestfs_h *handle);
Get the autosync flag.
This function returns a C truth value on success or -1 on error.
int guestfs_get_direct (guestfs_h *handle);
Return the direct appliance mode flag.
This function returns a C truth value on success or -1 on error.
char *guestfs_get_e2label (guestfs_h *handle,
const char *device);
This returns the ext2/3/4 filesystem label of the filesystem on
device.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char *guestfs_get_e2uuid (guestfs_h *handle,
const char *device);
This returns the ext2/3/4 filesystem UUID of the filesystem on
device.
This function returns a string, or NULL on error. The caller must free the returned string after use.
int guestfs_get_memsize (guestfs_h *handle);
This gets the memory size in megabytes allocated to the qemu subprocess.
If guestfs_set_memsize was not called
on this handle, and if LIBGUESTFS_MEMSIZE was not set,
then this returns the compiled-in default value for memsize.
For more information on the architecture of libguestfs, see guestfs(3).
On error this function returns -1.
const char *guestfs_get_path (guestfs_h *handle);
Return the current search path.
This is always non-NULL. If it wasn't set already, then this will return the default path.
This function returns a string, or NULL on error. The string is owned by the guest handle and must not be freed.
int guestfs_get_pid (guestfs_h *handle);
Return the process ID of the qemu subprocess. If there is no qemu subprocess, then this will return an error.
This is an internal call used for debugging and testing.
On error this function returns -1.
const char *guestfs_get_qemu (guestfs_h *handle);
Return the current qemu binary.
This is always non-NULL. If it wasn't set already, then this will return the default qemu binary name.
This function returns a string, or NULL on error. The string is owned by the guest handle and must not be freed.
int guestfs_get_selinux (guestfs_h *handle);
This returns the current setting of the selinux flag which
is passed to the appliance at boot time. See guestfs_set_selinux.
For more information on the architecture of libguestfs, see guestfs(3).
This function returns a C truth value on success or -1 on error.
int guestfs_get_state (guestfs_h *handle);
This returns the current state as an opaque integer. This is only useful for printing debug and internal error messages.
For more information on states, see guestfs(3).
On error this function returns -1.
int guestfs_get_trace (guestfs_h *handle);
Return the command trace flag.
This function returns a C truth value on success or -1 on error.
int guestfs_get_verbose (guestfs_h *handle);
This returns the verbose messages flag.
This function returns a C truth value on success or -1 on error.
char *guestfs_getcon (guestfs_h *handle);
This gets the SELinux security context of the daemon.
See the documentation about SELINUX in guestfs(3),
and guestfs_setcon
This function returns a string, or NULL on error. The caller must free the returned string after use.
struct guestfs_xattr_list *guestfs_getxattrs (guestfs_h *handle,
const char *path);
This call lists the extended attributes of the file or directory
path.
At the system call level, this is a combination of the listxattr(2) and getxattr(2) calls.
See also: guestfs_lgetxattrs, attr(5).
This function returns a struct guestfs_xattr_list *
(see <guestfs-structs.h>),
or NULL if there was an error.
The caller must call guestfs_free_xattr_list after use.
char **guestfs_glob_expand (guestfs_h *handle,
const char *pattern);
This command searches for all the pathnames matching
pattern according to the wildcard expansion rules
used by the shell.
If no paths match, then this returns an empty list (note: not an error).
It is just a wrapper around the C glob(3) function
with flags GLOB_MARK|GLOB_BRACE.
See that manual page for more details.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
char **guestfs_grep (guestfs_h *handle,
const char *regex,
const char *path);
This calls the external grep program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_grepi (guestfs_h *handle,
const char *regex,
const char *path);
This calls the external grep -i program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
int guestfs_grub_install (guestfs_h *handle,
const char *root,
const char *device);
This command installs GRUB (the Grand Unified Bootloader) on
device, with the root directory being root.
This function returns 0 on success or -1 on error.
char **guestfs_head (guestfs_h *handle,
const char *path);
This command returns up to the first 10 lines of a file as a list of strings.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_head_n (guestfs_h *handle,
int nrlines,
const char *path);
If the parameter nrlines is a positive number, this returns the first
nrlines lines of the file path.
If the parameter nrlines is a negative number, this returns lines
from the file path, excluding the last nrlines lines.
If the parameter nrlines is zero, this returns an empty list.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char *guestfs_hexdump (guestfs_h *handle,
const char *path);
This runs hexdump -C on the given path. The result is
the human-readable, canonical hex dump of the file.
This function returns a string, or NULL on error. The caller must free the returned string after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_initrd_list (guestfs_h *handle,
const char *path);
This command lists out files contained in an initrd.
The files are listed without any initial / character. The
files are listed in the order they appear (not necessarily
alphabetical). Directory names are listed as separate items.
Old Linux kernels (2.4 and earlier) used a compressed ext2 filesystem as initrd. We only support the newer initramfs format (compressed cpio files).
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
int64_t guestfs_inotify_add_watch (guestfs_h *handle,
const char *path,
int mask);
Watch path for the events listed in mask.
Note that if path is a directory then events within that
directory are watched, but this does not happen recursively
(in subdirectories).
Note for non-C or non-Linux callers: the inotify events are
defined by the Linux kernel ABI and are listed in
/usr/include/sys/inotify.h.
On error this function returns -1.
int guestfs_inotify_close (guestfs_h *handle);
This closes the inotify handle which was previously opened by inotify_init. It removes all watches, throws away any pending events, and deallocates all resources.
This function returns 0 on success or -1 on error.
char **guestfs_inotify_files (guestfs_h *handle);
This function is a helpful wrapper around guestfs_inotify_read
which just returns a list of pathnames of objects that were
touched. The returned pathnames are sorted and deduplicated.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
int guestfs_inotify_init (guestfs_h *handle,
int maxevents);
This command creates a new inotify handle. The inotify subsystem can be used to notify events which happen to objects in the guest filesystem.
maxevents is the maximum number of events which will be
queued up between calls to guestfs_inotify_read or
guestfs_inotify_files.
If this is passed as 0, then the kernel (or previously set)
default is used. For Linux 2.6.29 the default was 16384 events.
Beyond this limit, the kernel throws away events, but records
the fact that it threw them away by setting a flag
IN_Q_OVERFLOW in the returned structure list (see
guestfs_inotify_read).
Before any events are generated, you have to add some
watches to the internal watch list. See:
guestfs_inotify_add_watch,
guestfs_inotify_rm_watch and
guestfs_inotify_watch_all.
Queued up events should be read periodically by calling
guestfs_inotify_read
(or guestfs_inotify_files which is just a helpful
wrapper around guestfs_inotify_read). If you don't
read the events out often enough then you risk the internal
queue overflowing.
The handle should be closed after use by calling
guestfs_inotify_close. This also removes any
watches automatically.
See also inotify(7) for an overview of the inotify interface as exposed by the Linux kernel, which is roughly what we expose via libguestfs. Note that there is one global inotify handle per libguestfs instance.
This function returns 0 on success or -1 on error.
struct guestfs_inotify_event_list *guestfs_inotify_read (guestfs_h *handle);
Return the complete queue of events that have happened since the previous read call.
If no events have happened, this returns an empty list.
Note: In order to make sure that all events have been read, you must call this function repeatedly until it returns an empty list. The reason is that the call will read events up to the maximum appliance-to-host message size and leave remaining events in the queue.
This function returns a struct guestfs_inotify_event_list *
(see <guestfs-structs.h>),
or NULL if there was an error.
The caller must call guestfs_free_inotify_event_list after use.
int guestfs_inotify_rm_watch (guestfs_h *handle,
int wd);
Remove a previously defined inotify watch.
See guestfs_inotify_add_watch.
This function returns 0 on success or -1 on error.
int guestfs_is_busy (guestfs_h *handle);
This returns true iff this handle is busy processing a command
(in the BUSY state).
For more information on states, see guestfs(3).
This function returns a C truth value on success or -1 on error.
int guestfs_is_config (guestfs_h *handle);
This returns true iff this handle is being configured
(in the CONFIG state).
For more information on states, see guestfs(3).
This function returns a C truth value on success or -1 on error.
int guestfs_is_dir (guestfs_h *handle,
const char *path);
This returns true if and only if there is a directory
with the given path name. Note that it returns false for
other objects like files.
See also guestfs_stat.
This function returns a C truth value on success or -1 on error.
int guestfs_is_file (guestfs_h *handle,
const char *path);
This returns true if and only if there is a file
with the given path name. Note that it returns false for
other objects like directories.
See also guestfs_stat.
This function returns a C truth value on success or -1 on error.
int guestfs_is_launching (guestfs_h *handle);
This returns true iff this handle is launching the subprocess
(in the LAUNCHING state).
For more information on states, see guestfs(3).
This function returns a C truth value on success or -1 on error.
int guestfs_is_ready (guestfs_h *handle);
This returns true iff this handle is ready to accept commands
(in the READY state).
For more information on states, see guestfs(3).
This function returns a C truth value on success or -1 on error.
int guestfs_kill_subprocess (guestfs_h *handle);
This kills the qemu subprocess. You should never need to call this.
This function returns 0 on success or -1 on error.
int guestfs_launch (guestfs_h *handle);
Internally libguestfs is implemented by running a virtual machine using qemu(1).
You should call this after configuring the handle (eg. adding drives) but before performing any actions.
This function returns 0 on success or -1 on error.
struct guestfs_xattr_list *guestfs_lgetxattrs (guestfs_h *handle,
const char *path);
This is the same as guestfs_getxattrs, but if path
is a symbolic link, then it returns the extended attributes
of the link itself.
This function returns a struct guestfs_xattr_list *
(see <guestfs-structs.h>),
or NULL if there was an error.
The caller must call guestfs_free_xattr_list after use.
char **guestfs_list_devices (guestfs_h *handle);
List all the block devices.
The full block device names are returned, eg. /dev/sda
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
char **guestfs_list_partitions (guestfs_h *handle);
List all the partitions detected on all block devices.
The full partition device names are returned, eg. /dev/sda1
This does not return logical volumes. For that you will need to
call guestfs_lvs.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
char *guestfs_ll (guestfs_h *handle,
const char *directory);
List the files in directory (relative to the root directory,
there is no cwd) in the format of 'ls -la'.
This command is mostly useful for interactive sessions. It is not intended that you try to parse the output string.
This function returns a string, or NULL on error. The caller must free the returned string after use.
int guestfs_ln (guestfs_h *handle,
const char *target,
const char *linkname);
This command creates a hard link using the ln command.
This function returns 0 on success or -1 on error.
int guestfs_ln_f (guestfs_h *handle,
const char *target,
const char *linkname);
This command creates a hard link using the ln -f command.
The -f option removes the link (linkname) if it exists already.
This function returns 0 on success or -1 on error.
int guestfs_ln_s (guestfs_h *handle,
const char *target,
const char *linkname);
This command creates a symbolic link using the ln -s command.
This function returns 0 on success or -1 on error.
int guestfs_ln_sf (guestfs_h *handle,
const char *target,
const char *linkname);
This command creates a symbolic link using the ln -sf command,
The -f option removes the link (linkname) if it exists already.
This function returns 0 on success or -1 on error.
int guestfs_lremovexattr (guestfs_h *handle,
const char *xattr,
const char *path);
This is the same as guestfs_removexattr, but if path
is a symbolic link, then it removes an extended attribute
of the link itself.
This function returns 0 on success or -1 on error.
char **guestfs_ls (guestfs_h *handle,
const char *directory);
List the files in directory (relative to the root directory,
there is no cwd). The '.' and '..' entries are not returned, but
hidden files are shown.
This command is mostly useful for interactive sessions. Programs
should probably use guestfs_readdir instead.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
int guestfs_lsetxattr (guestfs_h *handle,
const char *xattr,
const char *val,
int vallen,
const char *path);
This is the same as guestfs_setxattr, but if path
is a symbolic link, then it sets an extended attribute
of the link itself.
This function returns 0 on success or -1 on error.
struct guestfs_stat *guestfs_lstat (guestfs_h *handle,
const char *path);
Returns file information for the given path.
This is the same as guestfs_stat except that if path
is a symbolic link, then the link is stat-ed, not the file it
refers to.
This is the same as the lstat(2) system call.
This function returns a struct guestfs_stat *,
or NULL if there was an error.
The caller must call guestfs_free_stat after use.
int guestfs_lvcreate (guestfs_h *handle,
const char *logvol,
const char *volgroup,
int mbytes);
This creates an LVM volume group called logvol
on the volume group volgroup, with size megabytes.
This function returns 0 on success or -1 on error.
int guestfs_lvm_remove_all (guestfs_h *handle);
This command removes all LVM logical volumes, volume groups and physical volumes.
This function returns 0 on success or -1 on error.
This command is dangerous. Without careful use you can easily destroy all your data.
int guestfs_lvremove (guestfs_h *handle,
const char *device);
Remove an LVM logical volume device, where device is
the path to the LV, such as /dev/VG/LV.
You can also remove all LVs in a volume group by specifying
the VG name, /dev/VG.
This function returns 0 on success or -1 on error.
int guestfs_lvresize (guestfs_h *handle,
const char *device,
int mbytes);
This resizes (expands or shrinks) an existing LVM logical
volume to mbytes. When reducing, data in the reduced part
is lost.
This function returns 0 on success or -1 on error.
char **guestfs_lvs (guestfs_h *handle);
List all the logical volumes detected. This is the equivalent of the lvs(8) command.
This returns a list of the logical volume device names
(eg. /dev/VolGroup00/LogVol00).
See also guestfs_lvs_full.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
struct guestfs_lvm_lv_list *guestfs_lvs_full (guestfs_h *handle);
List all the logical volumes detected. This is the equivalent of the lvs(8) command. The "full" version includes all fields.
This function returns a struct guestfs_lvm_lv_list *
(see <guestfs-structs.h>),
or NULL if there was an error.
The caller must call guestfs_free_lvm_lv_list after use.
int guestfs_mkdir (guestfs_h *handle,
const char *path);
Create a directory named path.
This function returns 0 on success or -1 on error.
int guestfs_mkdir_p (guestfs_h *handle,
const char *path);
Create a directory named path, creating any parent directories
as necessary. This is like the mkdir -p shell command.
This function returns 0 on success or -1 on error.
char *guestfs_mkdtemp (guestfs_h *handle,
const char *template);
This command creates a temporary directory. The
template parameter should be a full pathname for the
temporary directory name with the final six characters being
"XXXXXX".
For example: "/tmp/myprogXXXXXX" or "/Temp/myprogXXXXXX", the second one being suitable for Windows filesystems.
The name of the temporary directory that was created is returned.
The temporary directory is created with mode 0700 and is owned by root.
The caller is responsible for deleting the temporary directory and its contents after use.
See also: mkdtemp(3)
This function returns a string, or NULL on error. The caller must free the returned string after use.
int guestfs_mke2fs_J (guestfs_h *handle,
const char *fstype,
int blocksize,
const char *device,
const char *journal);
This creates an ext2/3/4 filesystem on device with
an external journal on journal. It is equivalent
to the command:
mke2fs -t fstype -b blocksize -J device=<journal> <device>
See also guestfs_mke2journal.
This function returns 0 on success or -1 on error.
int guestfs_mke2fs_JL (guestfs_h *handle,
const char *fstype,
int blocksize,
const char *device,
const char *label);
This creates an ext2/3/4 filesystem on device with
an external journal on the journal labeled label.
See also guestfs_mke2journal_L.
This function returns 0 on success or -1 on error.
int guestfs_mke2fs_JU (guestfs_h *handle,
const char *fstype,
int blocksize,
const char *device,
const char *uuid);
This creates an ext2/3/4 filesystem on device with
an external journal on the journal with UUID uuid.
See also guestfs_mke2journal_U.
This function returns 0 on success or -1 on error.
int guestfs_mke2journal (guestfs_h *handle,
int blocksize,
const char *device);
This creates an ext2 external journal on device. It is equivalent
to the command:
mke2fs -O journal_dev -b blocksize device
This function returns 0 on success or -1 on error.
int guestfs_mke2journal_L (guestfs_h *handle,
int blocksize,
const char *label,
const char *device);
This creates an ext2 external journal on device with label label.
This function returns 0 on success or -1 on error.
int guestfs_mke2journal_U (guestfs_h *handle,
int blocksize,
const char *uuid,
const char *device);
This creates an ext2 external journal on device with UUID uuid.
This function returns 0 on success or -1 on error.
int guestfs_mkfifo (guestfs_h *handle,
int mode,
const char *path);
This call creates a FIFO (named pipe) called path with
mode mode. It is just a convenient wrapper around
guestfs_mknod.
This function returns 0 on success or -1 on error.
int guestfs_mkfs (guestfs_h *handle,
const char *fstype,
const char *device);
This creates a filesystem on device (usually a partition
or LVM logical volume). The filesystem type is fstype, for
example ext3.
This function returns 0 on success or -1 on error.
int guestfs_mkfs_b (guestfs_h *handle,
const char *fstype,
int blocksize,
const char *device);
This call is similar to guestfs_mkfs, but it allows you to
control the block size of the resulting filesystem. Supported
block sizes depend on the filesystem type, but typically they
are 1024, 2048 or 4096 only.
This function returns 0 on success or -1 on error.
int guestfs_mkmountpoint (guestfs_h *handle,
const char *exemptpath);
guestfs_mkmountpoint and guestfs_rmmountpoint are
specialized calls that can be used to create extra mountpoints
before mounting the first filesystem.
These calls are only necessary in some very limited circumstances, mainly the case where you want to mount a mix of unrelated and/or read-only filesystems together.
For example, live CDs often contain a "Russian doll" nest of filesystems, an ISO outer layer, with a squashfs image inside, with an ext2/3 image inside that. You can unpack this as follows in guestfish:
add-ro Fedora-11-i686-Live.iso run mkmountpoint /cd mkmountpoint /squash mkmountpoint /ext3 mount /dev/sda /cd mount-loop /cd/LiveOS/squashfs.img /squash mount-loop /squash/LiveOS/ext3fs.img /ext3
The inner filesystem is now unpacked under the /ext3 mountpoint.
This function returns 0 on success or -1 on error.
int guestfs_mknod (guestfs_h *handle,
int mode,
int devmajor,
int devminor,
const char *path);
This call creates block or character special devices, or named pipes (FIFOs).
The mode parameter should be the mode, using the standard
constants. devmajor and devminor are the
device major and minor numbers, only used when creating block
and character special devices.
This function returns 0 on success or -1 on error.
int guestfs_mknod_b (guestfs_h *handle,
int mode,
int devmajor,
int devminor,
const char *path);
This call creates a block device node called path with
mode mode and device major/minor devmajor and devminor.
It is just a convenient wrapper around guestfs_mknod.
This function returns 0 on success or -1 on error.
int guestfs_mknod_c (guestfs_h *handle,
int mode,
int devmajor,
int devminor,
const char *path);
This call creates a char device node called path with
mode mode and device major/minor devmajor and devminor.
It is just a convenient wrapper around guestfs_mknod.
This function returns 0 on success or -1 on error.
int guestfs_mkswap (guestfs_h *handle,
const char *device);
Create a swap partition on device.
This function returns 0 on success or -1 on error.
int guestfs_mkswap_L (guestfs_h *handle,
const char *label,
const char *device);
Create a swap partition on device with label label.
Note that you cannot attach a swap label to a block device
(eg. /dev/sda), just to a partition. This appears to be
a limitation of the kernel or swap tools.
This function returns 0 on success or -1 on error.
int guestfs_mkswap_U (guestfs_h *handle,
const char *uuid,
const char *device);
Create a swap partition on device with UUID uuid.
This function returns 0 on success or -1 on error.
int guestfs_mkswap_file (guestfs_h *handle,
const char *path);
Create a swap file.
This command just writes a swap file signature to an existing
file. To create the file itself, use something like guestfs_fallocate.
This function returns 0 on success or -1 on error.
int guestfs_modprobe (guestfs_h *handle,
const char *modulename);
This loads a kernel module in the appliance.
The kernel module must have been whitelisted when libguestfs
was built (see appliance/kmod.whitelist.in in the source).
This function returns 0 on success or -1 on error.
int guestfs_mount (guestfs_h *handle,
const char *device,
const char *mountpoint);
Mount a guest disk at a position in the filesystem. Block devices
are named /dev/sda, /dev/sdb and so on, as they were added to
the guest. If those block devices contain partitions, they will have
the usual names (eg. /dev/sda1). Also LVM /dev/VG/LV-style
names can be used.
The rules are the same as for mount(2): A filesystem must
first be mounted on / before others can be mounted. Other
filesystems can only be mounted on directories which already
exist.
The mounted filesystem is writable, if we have sufficient permissions on the underlying device.
The filesystem options sync and noatime are set with this
call, in order to improve reliability.
This function returns 0 on success or -1 on error.
int guestfs_mount_loop (guestfs_h *handle,
const char *file,
const char *mountpoint);
This command lets you mount file (a filesystem image
in a file) on a mount point. It is entirely equivalent to
the command mount -o loop file mountpoint.
This function returns 0 on success or -1 on error.
int guestfs_mount_options (guestfs_h *handle,
const char *options,
const char *device,
const char *mountpoint);
This is the same as the guestfs_mount command, but it
allows you to set the mount options as for the
mount(8) -o flag.
This function returns 0 on success or -1 on error.
int guestfs_mount_ro (guestfs_h *handle,
const char *device,
const char *mountpoint);
This is the same as the guestfs_mount command, but it
mounts the filesystem with the read-only (-o ro) flag.
This function returns 0 on success or -1 on error.
int guestfs_mount_vfs (guestfs_h *handle,
const char *options,
const char *vfstype,
const char *device,
const char *mountpoint);
This is the same as the guestfs_mount command, but it
allows you to set both the mount options and the vfstype
as for the mount(8) -o and -t flags.
This function returns 0 on success or -1 on error.
char **guestfs_mountpoints (guestfs_h *handle);
This call is similar to guestfs_mounts. That call returns
a list of devices. This one returns a hash table (map) of
device name to directory where the device is mounted.
This function returns a NULL-terminated array of
strings, or NULL if there was an error.
The array of strings will always have length 2n+1, where
n keys and values alternate, followed by the trailing NULL entry.
The caller must free the strings and the array after use.
char **guestfs_mounts (guestfs_h *handle);
This returns the list of currently mounted filesystems. It returns
the list of devices (eg. /dev/sda1, /dev/VG/LV).
Some internal mounts are not shown.
See also: guestfs_mountpoints
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
int guestfs_mv (guestfs_h *handle,
const char *src,
const char *dest);
This moves a file from src to dest where dest is
either a destination filename or destination directory.
This function returns 0 on success or -1 on error.
int guestfs_ntfs_3g_probe (guestfs_h *handle,
int rw,
const char *device);
This command runs the ntfs-3g.probe(8) command which probes
an NTFS device for mountability. (Not all NTFS volumes can
be mounted read-write, and some cannot be mounted at all).
rw is a boolean flag. Set it to true if you want to test
if the volume can be mounted read-write. Set it to false if
you want to test if the volume can be mounted read-only.
The return value is an integer which 0 if the operation
would succeed, or some non-zero value documented in the
ntfs-3g.probe(8) manual page.
On error this function returns -1.
int guestfs_ping_daemon (guestfs_h *handle);
This is a test probe into the guestfs daemon running inside the qemu subprocess. Calling this function checks that the daemon responds to the ping message, without affecting the daemon or attached block device(s) in any other way.
This function returns 0 on success or -1 on error.
int guestfs_pvcreate (guestfs_h *handle,
const char *device);
This creates an LVM physical volume on the named device,
where device should usually be a partition name such
as /dev/sda1.
This function returns 0 on success or -1 on error.
int guestfs_pvremove (guestfs_h *handle,
const char *device);
This wipes a physical volume device so that LVM will no longer
recognise it.
The implementation uses the pvremove command which refuses to
wipe physical volumes that contain any volume groups, so you have
to remove those first.
This function returns 0 on success or -1 on error.
int guestfs_pvresize (guestfs_h *handle,
const char *device);
This resizes (expands or shrinks) an existing LVM physical volume to match the new size of the underlying device.
This function returns 0 on success or -1 on error.
char **guestfs_pvs (guestfs_h *handle);
List all the physical volumes detected. This is the equivalent of the pvs(8) command.
This returns a list of just the device names that contain
PVs (eg. /dev/sda2).
See also guestfs_pvs_full.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
struct guestfs_lvm_pv_list *guestfs_pvs_full (guestfs_h *handle);
List all the physical volumes detected. This is the equivalent of the pvs(8) command. The "full" version includes all fields.
This function returns a struct guestfs_lvm_pv_list *
(see <guestfs-structs.h>),
or NULL if there was an error.
The caller must call guestfs_free_lvm_pv_list after use.
char *guestfs_read_file (guestfs_h *handle,
const char *path,
size_t *size_r);
This calls returns the contents of the file path as a
buffer.
Unlike guestfs_cat, this function can correctly
handle files that contain embedded ASCII NUL characters.
However unlike guestfs_download, this function is limited
in the total size of file that can be handled.
This function returns a buffer, or NULL on error.
The size of the returned buffer is written to *size_r.
The caller must free the returned buffer after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_read_lines (guestfs_h *handle,
const char *path);
Return the contents of the file named path.
The file contents are returned as a list of lines. Trailing
LF and CRLF character sequences are not returned.
Note that this function cannot correctly handle binary files
(specifically, files containing \0 character which is treated
as end of line). For those you need to use the guestfs_read_file
function which has a more complex interface.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
struct guestfs_dirent_list *guestfs_readdir (guestfs_h *handle,
const char *dir);
This returns the list of directory entries in directory dir.
All entries in the directory are returned, including . and
... The entries are not sorted, but returned in the same
order as the underlying filesystem.
Also this call returns basic file type information about each
file. The ftyp field will contain one of the following characters:
Block special
Char special
Directory
FIFO (named pipe)
Symbolic link
Regular file
Socket
Unknown file type
The readdir(3) returned a d_type field with an
unexpected value
This function is primarily intended for use by programs. To
get a simple list of names, use guestfs_ls. To get a printable
directory for human consumption, use guestfs_ll.
This function returns a struct guestfs_dirent_list *
(see <guestfs-structs.h>),
or NULL if there was an error.
The caller must call guestfs_free_dirent_list after use.
char *guestfs_readlink (guestfs_h *handle,
const char *path);
This command reads the target of a symbolic link.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char *guestfs_realpath (guestfs_h *handle,
const char *path);
Return the canonicalized absolute pathname of path. The
returned path has no ., .. or symbolic link path elements.
This function returns a string, or NULL on error. The caller must free the returned string after use.
int guestfs_removexattr (guestfs_h *handle,
const char *xattr,
const char *path);
This call removes the extended attribute named xattr
of the file path.
See also: guestfs_lremovexattr, attr(5).
This function returns 0 on success or -1 on error.
int guestfs_resize2fs (guestfs_h *handle,
const char *device);
This resizes an ext2 or ext3 filesystem to match the size of the underlying device.
Note: It is sometimes required that you run guestfs_e2fsck_f
on the device before calling this command. For unknown reasons
resize2fs sometimes gives an error about this and sometimes not.
In any case, it is always safe to call guestfs_e2fsck_f before
calling this function.
This function returns 0 on success or -1 on error.
int guestfs_rm (guestfs_h *handle,
const char *path);
Remove the single file path.
This function returns 0 on success or -1 on error.
int guestfs_rm_rf (guestfs_h *handle,
const char *path);
Remove the file or directory path, recursively removing the
contents if its a directory. This is like the rm -rf shell
command.
This function returns 0 on success or -1 on error.
int guestfs_rmdir (guestfs_h *handle,
const char *path);
Remove the single directory path.
This function returns 0 on success or -1 on error.
int guestfs_rmmountpoint (guestfs_h *handle,
const char *exemptpath);
This calls removes a mountpoint that was previously created
with guestfs_mkmountpoint. See guestfs_mkmountpoint
for full details.
This function returns 0 on success or -1 on error.
int guestfs_scrub_device (guestfs_h *handle,
const char *device);
This command writes patterns over device to make data retrieval
more difficult.
It is an interface to the scrub(1) program. See that manual page for more details.
This function returns 0 on success or -1 on error.
This command is dangerous. Without careful use you can easily destroy all your data.
int guestfs_scrub_file (guestfs_h *handle,
const char *file);
This command writes patterns over a file to make data retrieval more difficult.
The file is removed after scrubbing.
It is an interface to the scrub(1) program. See that manual page for more details.
This function returns 0 on success or -1 on error.
int guestfs_scrub_freespace (guestfs_h *handle,
const char *dir);
This command creates the directory dir and then fills it
with files until the filesystem is full, and scrubs the files
as for guestfs_scrub_file, and deletes them.
The intention is to scrub any free space on the partition
containing dir.
It is an interface to the scrub(1) program. See that manual page for more details.
This function returns 0 on success or -1 on error.
int guestfs_set_append (guestfs_h *handle,
const char *append);
This function is used to add additional options to the guest kernel command line.
The default is NULL unless overridden by setting
LIBGUESTFS_APPEND environment variable.
Setting append to NULL means no additional options
are passed (libguestfs always adds a few of its own).
This function returns 0 on success or -1 on error.
int guestfs_set_autosync (guestfs_h *handle,
int autosync);
If autosync is true, this enables autosync. Libguestfs will make a
best effort attempt to run guestfs_umount_all followed by
guestfs_sync when the handle is closed
(also if the program exits without closing handles).
This is disabled by default (except in guestfish where it is enabled by default).
This function returns 0 on success or -1 on error.
int guestfs_set_direct (guestfs_h *handle,
int direct);
If the direct appliance mode flag is enabled, then stdin and stdout are passed directly through to the appliance once it is launched.
One consequence of this is that log messages aren't caught
by the library and handled by guestfs_set_log_message_callback,
but go straight to stdout.
You probably don't want to use this unless you know what you are doing.
The default is disabled.
This function returns 0 on success or -1 on error.
int guestfs_set_e2label (guestfs_h *handle,
const char *device,
const char *label);
This sets the ext2/3/4 filesystem label of the filesystem on
device to label. Filesystem labels are limited to
16 characters.
You can use either guestfs_tune2fs_l or guestfs_get_e2label
to return the existing label on a filesystem.
This function returns 0 on success or -1 on error.
int guestfs_set_e2uuid (guestfs_h *handle,
const char *device,
const char *uuid);
This sets the ext2/3/4 filesystem UUID of the filesystem on
device to uuid. The format of the UUID and alternatives
such as clear, random and time are described in the
tune2fs(8) manpage.
You can use either guestfs_tune2fs_l or guestfs_get_e2uuid
to return the existing UUID of a filesystem.
This function returns 0 on success or -1 on error.
int guestfs_set_memsize (guestfs_h *handle,
int memsize);
This sets the memory size in megabytes allocated to the
qemu subprocess. This only has any effect if called before
guestfs_launch.
You can also change this by setting the environment
variable LIBGUESTFS_MEMSIZE before the handle is
created.
For more information on the architecture of libguestfs, see guestfs(3).
This function returns 0 on success or -1 on error.
int guestfs_set_path (guestfs_h *handle,
const char *searchpath);
Set the path that libguestfs searches for kernel and initrd.img.
The default is $libdir/guestfs unless overridden by setting
LIBGUESTFS_PATH environment variable.
Setting path to NULL restores the default path.
This function returns 0 on success or -1 on error.
int guestfs_set_qemu (guestfs_h *handle,
const char *qemu);
Set the qemu binary that we will use.
The default is chosen when the library was compiled by the configure script.
You can also override this by setting the LIBGUESTFS_QEMU
environment variable.
Setting qemu to NULL restores the default qemu binary.
This function returns 0 on success or -1 on error.
int guestfs_set_selinux (guestfs_h *handle,
int selinux);
This sets the selinux flag that is passed to the appliance
at boot time. The default is selinux=0 (disabled).
Note that if SELinux is enabled, it is always in
Permissive mode (enforcing=0).
For more information on the architecture of libguestfs, see guestfs(3).
This function returns 0 on success or -1 on error.
int guestfs_set_trace (guestfs_h *handle,
int trace);
If the command trace flag is set to 1, then commands are printed on stdout before they are executed in a format which is very similar to the one used by guestfish. In other words, you can run a program with this enabled, and you will get out a script which you can feed to guestfish to perform the same set of actions.
If you want to trace C API calls into libguestfs (and
other libraries) then possibly a better way is to use
the external ltrace(1) command.
Command traces are disabled unless the environment variable
LIBGUESTFS_TRACE is defined and set to 1.
This function returns 0 on success or -1 on error.
int guestfs_set_verbose (guestfs_h *handle,
int verbose);
If verbose is true, this turns on verbose messages (to stderr).
Verbose messages are disabled unless the environment variable
LIBGUESTFS_DEBUG is defined and set to 1.
This function returns 0 on success or -1 on error.
int guestfs_setcon (guestfs_h *handle,
const char *context);
This sets the SELinux security context of the daemon
to the string context.
See the documentation about SELINUX in guestfs(3).
This function returns 0 on success or -1 on error.
int guestfs_setxattr (guestfs_h *handle,
const char *xattr,
const char *val,
int vallen,
const char *path);
This call sets the extended attribute named xattr
of the file path to the value val (of length vallen).
The value is arbitrary 8 bit data.
See also: guestfs_lsetxattr, attr(5).
This function returns 0 on success or -1 on error.
int guestfs_sfdisk (guestfs_h *handle,
const char *device,
int cyls,
int heads,
int sectors,
char *const *lines);
This is a direct interface to the sfdisk(8) program for creating partitions on block devices.
device should be a block device, for example /dev/sda.
cyls, heads and sectors are the number of cylinders, heads
and sectors on the device, which are passed directly to sfdisk as
the -C, -H and -S parameters. If you pass 0 for any
of these, then the corresponding parameter is omitted. Usually for
'large' disks, you can just pass 0 for these, but for small
(floppy-sized) disks, sfdisk (or rather, the kernel) cannot work
out the right geometry and you will need to tell it.
lines is a list of lines that we feed to sfdisk. For more
information refer to the sfdisk(8) manpage.
To create a single partition occupying the whole disk, you would
pass lines as a single element list, when the single element being
the string , (comma).
See also: guestfs_sfdisk_l, guestfs_sfdisk_N
This function returns 0 on success or -1 on error.
This command is dangerous. Without careful use you can easily destroy all your data.
int guestfs_sfdiskM (guestfs_h *handle,
const char *device,
char *const *lines);
This is a simplified interface to the guestfs_sfdisk
command, where partition sizes are specified in megabytes
only (rounded to the nearest cylinder) and you don't need
to specify the cyls, heads and sectors parameters which
were rarely if ever used anyway.
See also guestfs_sfdisk and the sfdisk(8) manpage.
This function returns 0 on success or -1 on error.
This command is dangerous. Without careful use you can easily destroy all your data.
int guestfs_sfdisk_N (guestfs_h *handle,
const char *device,
int partnum,
int cyls,
int heads,
int sectors,
const char *line);
This runs sfdisk(8) option to modify just the single
partition n (note: n counts from 1).
For other parameters, see guestfs_sfdisk. You should usually
pass 0 for the cyls/heads/sectors parameters.
This function returns 0 on success or -1 on error.
This command is dangerous. Without careful use you can easily destroy all your data.
char *guestfs_sfdisk_disk_geometry (guestfs_h *handle,
const char *device);
This displays the disk geometry of device read from the
partition table. Especially in the case where the underlying
block device has been resized, this can be different from the
kernel's idea of the geometry (see guestfs_sfdisk_kernel_geometry).
The result is in human-readable format, and not designed to be parsed.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char *guestfs_sfdisk_kernel_geometry (guestfs_h *handle,
const char *device);
This displays the kernel's idea of the geometry of device.
The result is in human-readable format, and not designed to be parsed.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char *guestfs_sfdisk_l (guestfs_h *handle,
const char *device);
This displays the partition table on device, in the
human-readable output of the sfdisk(8) command. It is
not intended to be parsed.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char *guestfs_sh (guestfs_h *handle,
const char *command);
This call runs a command from the guest filesystem via the
guest's /bin/sh.
This is like guestfs_command, but passes the command to:
/bin/sh -c "command"
Depending on the guest's shell, this usually results in wildcards being expanded, shell expressions being interpolated and so on.
All the provisos about guestfs_command apply to this call.
This function returns a string, or NULL on error. The caller must free the returned string after use.
char **guestfs_sh_lines (guestfs_h *handle,
const char *command);
This is the same as guestfs_sh, but splits the result
into a list of lines.
See also: guestfs_command_lines
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
int guestfs_sleep (guestfs_h *handle,
int secs);
Sleep for secs seconds.
This function returns 0 on success or -1 on error.
struct guestfs_stat *guestfs_stat (guestfs_h *handle,
const char *path);
Returns file information for the given path.
This is the same as the stat(2) system call.
This function returns a struct guestfs_stat *,
or NULL if there was an error.
The caller must call guestfs_free_stat after use.
struct guestfs_statvfs *guestfs_statvfs (guestfs_h *handle,
const char *path);
Returns file system statistics for any mounted file system.
path should be a file or directory in the mounted file system
(typically it is the mount point itself, but it doesn't need to be).
This is the same as the statvfs(2) system call.
This function returns a struct guestfs_statvfs *,
or NULL if there was an error.
The caller must call guestfs_free_statvfs after use.
char **guestfs_strings (guestfs_h *handle,
const char *path);
This runs the strings(1) command on a file and returns the list of printable strings found.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_strings_e (guestfs_h *handle,
const char *encoding,
const char *path);
This is like the guestfs_strings command, but allows you to
specify the encoding.
See the strings(1) manpage for the full list of encodings.
Commonly useful encodings are l (lower case L) which will
show strings inside Windows/x86 files.
The returned strings are transcoded to UTF-8.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
int guestfs_swapoff_device (guestfs_h *handle,
const char *device);
This command disables the libguestfs appliance swap
device or partition named device.
See guestfs_swapon_device.
This function returns 0 on success or -1 on error.
int guestfs_swapoff_file (guestfs_h *handle,
const char *file);
This command disables the libguestfs appliance swap on file.
This function returns 0 on success or -1 on error.
int guestfs_swapoff_label (guestfs_h *handle,
const char *label);
This command disables the libguestfs appliance swap on labeled swap partition.
This function returns 0 on success or -1 on error.
int guestfs_swapoff_uuid (guestfs_h *handle,
const char *uuid);
This command disables the libguestfs appliance swap partition with the given UUID.
This function returns 0 on success or -1 on error.
int guestfs_swapon_device (guestfs_h *handle,
const char *device);
This command enables the libguestfs appliance to use the
swap device or partition named device. The increased
memory is made available for all commands, for example
those run using guestfs_command or guestfs_sh.
Note that you should not swap to existing guest swap partitions unless you know what you are doing. They may contain hibernation information, or other information that the guest doesn't want you to trash. You also risk leaking information about the host to the guest this way. Instead, attach a new host device to the guest and swap on that.
This function returns 0 on success or -1 on error.
int guestfs_swapon_file (guestfs_h *handle,
const char *file);
This command enables swap to a file.
See guestfs_swapon_device for other notes.
This function returns 0 on success or -1 on error.
int guestfs_swapon_label (guestfs_h *handle,
const char *label);
This command enables swap to a labeled swap partition.
See guestfs_swapon_device for other notes.
This function returns 0 on success or -1 on error.
int guestfs_swapon_uuid (guestfs_h *handle,
const char *uuid);
This command enables swap to a swap partition with the given UUID.
See guestfs_swapon_device for other notes.
This function returns 0 on success or -1 on error.
int guestfs_sync (guestfs_h *handle);
This syncs the disk, so that any writes are flushed through to the underlying disk image.
You should always call this if you have modified a disk image, before closing the handle.
This function returns 0 on success or -1 on error.
char **guestfs_tail (guestfs_h *handle,
const char *path);
This command returns up to the last 10 lines of a file as a list of strings.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_tail_n (guestfs_h *handle,
int nrlines,
const char *path);
If the parameter nrlines is a positive number, this returns the last
nrlines lines of the file path.
If the parameter nrlines is a negative number, this returns lines
from the file path, starting with the -nrlinesth line.
If the parameter nrlines is zero, this returns an empty list.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
int guestfs_tar_in (guestfs_h *handle,
const char *tarfile,
const char *directory);
This command uploads and unpacks local file tarfile (an
uncompressed tar file) into directory.
To upload a compressed tarball, use guestfs_tgz_in.
This function returns 0 on success or -1 on error.
int guestfs_tar_out (guestfs_h *handle,
const char *directory,
const char *tarfile);
This command packs the contents of directory and downloads
it to local file tarfile.
To download a compressed tarball, use guestfs_tgz_out.
This function returns 0 on success or -1 on error.
int guestfs_tgz_in (guestfs_h *handle,
const char *tarball,
const char *directory);
This command uploads and unpacks local file tarball (a
gzip compressed tar file) into directory.
To upload an uncompressed tarball, use guestfs_tar_in.
This function returns 0 on success or -1 on error.
int guestfs_tgz_out (guestfs_h *handle,
const char *directory,
const char *tarball);
This command packs the contents of directory and downloads
it to local file tarball.
To download an uncompressed tarball, use guestfs_tar_out.
This function returns 0 on success or -1 on error.
int guestfs_touch (guestfs_h *handle,
const char *path);
Touch acts like the touch(1) command. It can be used to update the timestamps on a file, or, if the file does not exist, to create a new zero-length file.
This function returns 0 on success or -1 on error.
char **guestfs_tune2fs_l (guestfs_h *handle,
const char *device);
This returns the contents of the ext2, ext3 or ext4 filesystem
superblock on device.
It is the same as running tune2fs -l device. See tune2fs(8)
manpage for more details. The list of fields returned isn't
clearly defined, and depends on both the version of tune2fs
that libguestfs was built against, and the filesystem itself.
This function returns a NULL-terminated array of
strings, or NULL if there was an error.
The array of strings will always have length 2n+1, where
n keys and values alternate, followed by the trailing NULL entry.
The caller must free the strings and the array after use.
int guestfs_umask (guestfs_h *handle,
int mask);
This function sets the mask used for creating new files and
device nodes to mask & 0777.
Typical umask values would be 022 which creates new files
with permissions like "-rw-r--r--" or "-rwxr-xr-x", and
002 which creates new files with permissions like
"-rw-rw-r--" or "-rwxrwxr-x".
The default umask is 022. This is important because it
means that directories and device nodes will be created with
0644 or 0755 mode even if you specify 0777.
See also umask(2), guestfs_mknod, guestfs_mkdir.
This call returns the previous umask.
On error this function returns -1.
int guestfs_umount (guestfs_h *handle,
const char *pathordevice);
This unmounts the given filesystem. The filesystem may be specified either by its mountpoint (path) or the device which contains the filesystem.
This function returns 0 on success or -1 on error.
int guestfs_umount_all (guestfs_h *handle);
This unmounts all mounted filesystems.
Some internal mounts are not unmounted by this call.
This function returns 0 on success or -1 on error.
int guestfs_upload (guestfs_h *handle,
const char *filename,
const char *remotefilename);
Upload local file filename to remotefilename on the
filesystem.
filename can also be a named pipe.
See also guestfs_download.
This function returns 0 on success or -1 on error.
struct guestfs_version *guestfs_version (guestfs_h *handle);
Return the libguestfs version number that the program is linked against.
Note that because of dynamic linking this is not necessarily
the version of libguestfs that you compiled against. You can
compile the program, and then at runtime dynamically link
against a completely different libguestfs.so library.
This call was added in version 1.0.58. In previous
versions of libguestfs there was no way to get the version
number. From C code you can use ELF weak linking tricks to find out if
this symbol exists (if it doesn't, then it's an earlier version).
The call returns a structure with four elements. The first
three (major, minor and release) are numbers and
correspond to the usual version triplet. The fourth element
(extra) is a string and is normally empty, but may be
used for distro-specific information.
To construct the original version string:
$major.$minor.$release$extra
Note: Don't use this call to test for availability of features. Distro backports makes this unreliable.
This function returns a struct guestfs_version *,
or NULL if there was an error.
The caller must call guestfs_free_version after use.
int guestfs_vg_activate (guestfs_h *handle,
int activate,
char *const *volgroups);
This command activates or (if activate is false) deactivates
all logical volumes in the listed volume groups volgroups.
If activated, then they are made known to the
kernel, ie. they appear as /dev/mapper devices. If deactivated,
then those devices disappear.
This command is the same as running vgchange -a y|n volgroups...
Note that if volgroups is an empty list then all volume groups
are activated or deactivated.
This function returns 0 on success or -1 on error.
int guestfs_vg_activate_all (guestfs_h *handle,
int activate);
This command activates or (if activate is false) deactivates
all logical volumes in all volume groups.
If activated, then they are made known to the
kernel, ie. they appear as /dev/mapper devices. If deactivated,
then those devices disappear.
This command is the same as running vgchange -a y|n
This function returns 0 on success or -1 on error.
int guestfs_vgcreate (guestfs_h *handle,
const char *volgroup,
char *const *physvols);
This creates an LVM volume group called volgroup
from the non-empty list of physical volumes physvols.
This function returns 0 on success or -1 on error.
int guestfs_vgremove (guestfs_h *handle,
const char *vgname);
Remove an LVM volume group vgname, (for example VG).
This also forcibly removes all logical volumes in the volume group (if any).
This function returns 0 on success or -1 on error.
char **guestfs_vgs (guestfs_h *handle);
List all the volumes groups detected. This is the equivalent of the vgs(8) command.
This returns a list of just the volume group names that were
detected (eg. VolGroup00).
See also guestfs_vgs_full.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
struct guestfs_lvm_vg_list *guestfs_vgs_full (guestfs_h *handle);
List all the volumes groups detected. This is the equivalent of the vgs(8) command. The "full" version includes all fields.
This function returns a struct guestfs_lvm_vg_list *
(see <guestfs-structs.h>),
or NULL if there was an error.
The caller must call guestfs_free_lvm_vg_list after use.
int guestfs_wait_ready (guestfs_h *handle);
This function is a no op.
In versions of the API < 1.0.71 you had to call this function
just after calling guestfs_launch to wait for the launch
to complete. However this is no longer necessary because
guestfs_launch now does the waiting.
If you see any calls to this function in code then you can just remove them, unless you want to retain compatibility with older versions of the API.
This function returns 0 on success or -1 on error.
int guestfs_wc_c (guestfs_h *handle,
const char *path);
This command counts the characters in a file, using the
wc -c external command.
On error this function returns -1.
int guestfs_wc_l (guestfs_h *handle,
const char *path);
This command counts the lines in a file, using the
wc -l external command.
On error this function returns -1.
int guestfs_wc_w (guestfs_h *handle,
const char *path);
This command counts the words in a file, using the
wc -w external command.
On error this function returns -1.
int guestfs_write_file (guestfs_h *handle,
const char *path,
const char *content,
int size);
This call creates a file called path. The contents of the
file is the string content (which can contain any 8 bit data),
with length size.
As a special case, if size is 0
then the length is calculated using strlen (so in this case
the content cannot contain embedded ASCII NULs).
NB. Owing to a bug, writing content containing ASCII NUL
characters does not work, even if the length is specified.
We hope to resolve this bug in a future version. In the meantime
use guestfs_upload.
This function returns 0 on success or -1 on error.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_zegrep (guestfs_h *handle,
const char *regex,
const char *path);
This calls the external zegrep program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_zegrepi (guestfs_h *handle,
const char *regex,
const char *path);
This calls the external zegrep -i program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
int guestfs_zero (guestfs_h *handle,
const char *device);
This command writes zeroes over the first few blocks of device.
How many blocks are zeroed isn't specified (but it's not enough to securely wipe the device). It should be sufficient to remove any partition tables, filesystem superblocks and so on.
See also: guestfs_scrub_device.
This function returns 0 on success or -1 on error.
int guestfs_zerofree (guestfs_h *handle,
const char *device);
This runs the zerofree program on device. This program
claims to zero unused inodes and disk blocks on an ext2/3
filesystem, thus making it possible to compress the filesystem
more effectively.
You should not run this program if the filesystem is mounted.
It is possible that using this program can damage the filesystem or data on the filesystem.
This function returns 0 on success or -1 on error.
char **guestfs_zfgrep (guestfs_h *handle,
const char *pattern,
const char *path);
This calls the external zfgrep program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_zfgrepi (guestfs_h *handle,
const char *pattern,
const char *path);
This calls the external zfgrep -i program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char *guestfs_zfile (guestfs_h *handle,
const char *meth,
const char *path);
This command runs file after first decompressing path
using method.
method must be one of gzip, compress or bzip2.
Since 1.0.63, use guestfs_file instead which can now
process compressed files.
This function returns a string, or NULL on error. The caller must free the returned string after use.
This function is deprecated.
In new code, use the file call instead.
Deprecated functions will not be removed from the API, but the fact that they are deprecated indicates that there are problems with correct use of these functions.
char **guestfs_zgrep (guestfs_h *handle,
const char *regex,
const char *path);
This calls the external zgrep program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
char **guestfs_zgrepi (guestfs_h *handle,
const char *regex,
const char *path);
This calls the external zgrep -i program and returns the
matching lines.
This function returns a NULL-terminated array of strings (like environ(3)), or NULL if there was an error. The caller must free the strings and the array after use.
Because of the message protocol, there is a transfer limit of somewhere between 2MB and 4MB. To transfer large files you should use FTP.
struct guestfs_int_bool {
int32_t i;
int32_t b;
};
struct guestfs_int_bool_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_int_bool *val; /* Elements. */
};
void guestfs_free_int_bool (struct guestfs_free_int_bool *);
void guestfs_free_int_bool_list (struct guestfs_free_int_bool_list *);
struct guestfs_lvm_pv {
char *pv_name;
/* The next field is NOT nul-terminated, be careful when printing it: */
char pv_uuid[32];
char *pv_fmt;
uint64_t pv_size;
uint64_t dev_size;
uint64_t pv_free;
uint64_t pv_used;
char *pv_attr;
int64_t pv_pe_count;
int64_t pv_pe_alloc_count;
char *pv_tags;
uint64_t pe_start;
int64_t pv_mda_count;
uint64_t pv_mda_free;
};
struct guestfs_lvm_pv_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_lvm_pv *val; /* Elements. */
};
void guestfs_free_lvm_pv (struct guestfs_free_lvm_pv *);
void guestfs_free_lvm_pv_list (struct guestfs_free_lvm_pv_list *);
struct guestfs_lvm_vg {
char *vg_name;
/* The next field is NOT nul-terminated, be careful when printing it: */
char vg_uuid[32];
char *vg_fmt;
char *vg_attr;
uint64_t vg_size;
uint64_t vg_free;
char *vg_sysid;
uint64_t vg_extent_size;
int64_t vg_extent_count;
int64_t vg_free_count;
int64_t max_lv;
int64_t max_pv;
int64_t pv_count;
int64_t lv_count;
int64_t snap_count;
int64_t vg_seqno;
char *vg_tags;
int64_t vg_mda_count;
uint64_t vg_mda_free;
};
struct guestfs_lvm_vg_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_lvm_vg *val; /* Elements. */
};
void guestfs_free_lvm_vg (struct guestfs_free_lvm_vg *);
void guestfs_free_lvm_vg_list (struct guestfs_free_lvm_vg_list *);
struct guestfs_lvm_lv {
char *lv_name;
/* The next field is NOT nul-terminated, be careful when printing it: */
char lv_uuid[32];
char *lv_attr;
int64_t lv_major;
int64_t lv_minor;
int64_t lv_kernel_major;
int64_t lv_kernel_minor;
uint64_t lv_size;
int64_t seg_count;
char *origin;
/* The next field is [0..100] or -1 meaning 'not present': */
float snap_percent;
/* The next field is [0..100] or -1 meaning 'not present': */
float copy_percent;
char *move_pv;
char *lv_tags;
char *mirror_log;
char *modules;
};
struct guestfs_lvm_lv_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_lvm_lv *val; /* Elements. */
};
void guestfs_free_lvm_lv (struct guestfs_free_lvm_lv *);
void guestfs_free_lvm_lv_list (struct guestfs_free_lvm_lv_list *);
struct guestfs_stat {
int64_t dev;
int64_t ino;
int64_t mode;
int64_t nlink;
int64_t uid;
int64_t gid;
int64_t rdev;
int64_t size;
int64_t blksize;
int64_t blocks;
int64_t atime;
int64_t mtime;
int64_t ctime;
};
struct guestfs_stat_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_stat *val; /* Elements. */
};
void guestfs_free_stat (struct guestfs_free_stat *);
void guestfs_free_stat_list (struct guestfs_free_stat_list *);
struct guestfs_statvfs {
int64_t bsize;
int64_t frsize;
int64_t blocks;
int64_t bfree;
int64_t bavail;
int64_t files;
int64_t ffree;
int64_t favail;
int64_t fsid;
int64_t flag;
int64_t namemax;
};
struct guestfs_statvfs_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_statvfs *val; /* Elements. */
};
void guestfs_free_statvfs (struct guestfs_free_statvfs *);
void guestfs_free_statvfs_list (struct guestfs_free_statvfs_list *);
struct guestfs_dirent {
int64_t ino;
char ftyp;
char *name;
};
struct guestfs_dirent_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_dirent *val; /* Elements. */
};
void guestfs_free_dirent (struct guestfs_free_dirent *);
void guestfs_free_dirent_list (struct guestfs_free_dirent_list *);
struct guestfs_version {
int64_t major;
int64_t minor;
int64_t release;
char *extra;
};
struct guestfs_version_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_version *val; /* Elements. */
};
void guestfs_free_version (struct guestfs_free_version *);
void guestfs_free_version_list (struct guestfs_free_version_list *);
struct guestfs_xattr {
char *attrname;
/* The next two fields describe a byte array. */
uint32_t attrval_len;
char *attrval;
};
struct guestfs_xattr_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_xattr *val; /* Elements. */
};
void guestfs_free_xattr (struct guestfs_free_xattr *);
void guestfs_free_xattr_list (struct guestfs_free_xattr_list *);
struct guestfs_inotify_event {
int64_t in_wd;
uint32_t in_mask;
uint32_t in_cookie;
char *in_name;
};
struct guestfs_inotify_event_list {
uint32_t len; /* Number of elements in list. */
struct guestfs_inotify_event *val; /* Elements. */
};
void guestfs_free_inotify_event (struct guestfs_free_inotify_event *);
void guestfs_free_inotify_event_list (struct guestfs_free_inotify_event_list *);
Internally, libguestfs is implemented by running a virtual machine using qemu(1). QEmu runs as a child process of the main program, and most of this discussion won't make sense unless you understand that the complexity is dealing with the (asynchronous) actions of the child process.
child process
___________________ _________________________
/ \ / \
| main program | | qemu +-----------------+|
| | | | Linux kernel ||
+-------------------+ | +-----------------+|
| libguestfs <-------------->| guestfsd ||
| | | +-----------------+|
\___________________/ \_________________________/
The diagram above shows libguestfs communicating with the guestfsd daemon running inside the qemu child process. There are several points of failure here: qemu can fail to start, the virtual machine inside qemu can fail to boot, guestfsd can fail to start or not establish communication, any component can start successfully but fail asynchronously later, and so on.
libguestfs uses a state machine to model the child process:
|
guestfs_create
|
|
____V_____
/ \
| CONFIG |
\__________/
^ ^ ^ \
/ | \ \ guestfs_launch
/ | _\__V______
/ | / \
/ | | LAUNCHING |
/ | \___________/
/ | /
/ | guestfs_launch
/ | /
______ / __|____V
/ \ ------> / \
| BUSY | | READY |
\______/ <------ \________/
The normal transitions are (1) CONFIG (when the handle is created, but there is no child process), (2) LAUNCHING (when the child process is booting up), (3) alternating between READY and BUSY as commands are issued to, and carried out by, the child process.
The guest may be killed by guestfs_kill_subprocess, or may die
asynchronously at any time (eg. due to some internal error), and that
causes the state to transition back to CONFIG.
Configuration commands for qemu such as guestfs_add_drive can only
be issued when in the CONFIG state.
The high-level API offers two calls that go from CONFIG through
LAUNCHING to READY. guestfs_launch blocks until the child process
is READY to accept commands (or until some failure or timeout).
guestfs_launch internally moves the state from CONFIG to LAUNCHING
while it is running.
High-level API actions such as guestfs_mount can only be issued
when in the READY state. These high-level API calls block waiting for
the command to be carried out (ie. the state to transition to BUSY and
then back to READY). But using the low-level event API, you get
non-blocking versions. (But you can still only carry out one
operation per handle at a time - that is a limitation of the
communications protocol we use).
Finally, the child process sends asynchronous messages back to the main program, such as kernel log messages. Mostly these are ignored by the high-level API, but using the low-level event API you can register to receive these messages.
The child process generates events in some situations. Current events include: receiving a log message, the child process exits.
Use the guestfs_set_*_callback functions to set a callback for
different types of events.
Only one callback of each type can be registered for each handle.
Calling guestfs_set_*_callback again overwrites the previous
callback of that type. Cancel all callbacks of this type by calling
this function with cb set to NULL.
typedef void (*guestfs_log_message_cb) (guestfs_h *g, void *opaque,
char *buf, int len);
void guestfs_set_log_message_callback (guestfs_h *handle,
guestfs_log_message_cb cb,
void *opaque);
The callback function cb will be called whenever qemu or the guest
writes anything to the console.
Use this function to capture kernel messages and similar.
Normally there is no log message handler, and log messages are just discarded.
typedef void (*guestfs_subprocess_quit_cb) (guestfs_h *g, void *opaque);
void guestfs_set_subprocess_quit_callback (guestfs_h *handle,
guestfs_subprocess_quit_cb cb,
void *opaque);
The callback function cb will be called when the child process
quits, either asynchronously or if killed by
guestfs_kill_subprocess. (This corresponds to a transition from
any state to the CONFIG state).
typedef void (*guestfs_launch_done_cb) (guestfs_h *g, void *opaque);
void guestfs_set_launch_done_callback (guestfs_h *handle,
guestfs_ready_cb cb,
void *opaque);
The callback function cb will be called when the child process
becomes ready first time after it has been launched. (This
corresponds to a transition from LAUNCHING to the READY state).
In the kernel there is now quite a profusion of schemata for naming
block devices (in this context, by block device I mean a physical
or virtual hard drive). The original Linux IDE driver used names
starting with /dev/hd*. SCSI devices have historically used a
different naming scheme, /dev/sd*. When the Linux kernel libata
driver became a popular replacement for the old IDE driver
(particularly for SATA devices) those devices also used the
/dev/sd* scheme. Additionally we now have virtual machines with
paravirtualized drivers. This has created several different naming
systems, such as /dev/vd* for virtio disks and /dev/xvd* for Xen
PV disks.
As discussed above, libguestfs uses a qemu appliance running an embedded Linux kernel to access block devices. We can run a variety of appliances based on a variety of Linux kernels.
This causes a problem for libguestfs because many API calls use device or partition names. Working scripts and the recipe (example) scripts that we make available over the internet could fail if the naming scheme changes.
Therefore libguestfs defines /dev/sd* as the standard naming
scheme. Internally /dev/sd* names are translated, if necessary,
to other names as required. For example, under RHEL 5 which uses the
/dev/hd* scheme, any device parameter /dev/sda2 is translated to
/dev/hda2 transparently.
Note that this only applies to parameters. The
guestfs_list_devices, guestfs_list_partitions and similar calls
return the true names of the devices and partitions as known to the
appliance.
Usually this translation is transparent. However in some (very rare)
cases you may need to know the exact algorithm. Such cases include
where you use guestfs_config to add a mixture of virtio and IDE
devices to the qemu-based appliance, so have a mixture of /dev/sd*
and /dev/vd* devices.
The algorithm is applied only to parameters which are known to be
either device or partition names. Return values from functions such
as guestfs_list_devices are never changed.
Is the string a parameter which is a device or partition name?
Does the string begin with /dev/sd?
Does the named device exist? If so, we use that device. However if not then we continue with this algorithm.
Replace initial /dev/sd string with /dev/hd.
For example, change /dev/sda2 to /dev/hda2.
If that named device exists, use it. If not, continue.
Replace initial /dev/sd string with /dev/vd.
If that named device exists, use it. If not, return an error.
Although the standard naming scheme and automatic translation is useful for simple programs and guestfish scripts, for larger programs it is best not to rely on this mechanism.
Where possible for maximum future portability programs using libguestfs should use these future-proof techniques:
Use guestfs_list_devices or guestfs_list_partitions to list
actual device names, and then use those names directly.
Since those device names exist by definition, they will never be translated.
Use higher level ways to identify filesystems, such as LVM names, UUIDs and filesystem labels.
Don't rely on using this protocol directly. This section documents how it currently works, but it may change at any time.
The protocol used to talk between the library and the daemon running inside the qemu virtual machine is a simple RPC mechanism built on top of XDR (RFC 1014, RFC 1832, RFC 4506).
The detailed format of structures is in src/guestfs_protocol.x
(note: this file is automatically generated).
There are two broad cases, ordinary functions that don't have any
FileIn and FileOut parameters, which are handled with very
simple request/reply messages. Then there are functions that have any
FileIn or FileOut parameters, which use the same request and
reply messages, but they may also be followed by files sent using a
chunked encoding.
For ordinary functions, the request message is:
total length (header + arguments,
but not including the length word itself)
struct guestfs_message_header (encoded as XDR)
struct guestfs_<foo>_args (encoded as XDR)
The total length field allows the daemon to allocate a fixed size
buffer into which it slurps the rest of the message. As a result, the
total length is limited to GUESTFS_MESSAGE_MAX bytes (currently
4MB), which means the effective size of any request is limited to
somewhere under this size.
Note also that many functions don't take any arguments, in which case
the guestfs_foo_args is completely omitted.
The header contains the procedure number (guestfs_proc) which is
how the receiver knows what type of args structure to expect, or none
at all.
The reply message for ordinary functions is:
total length (header + ret,
but not including the length word itself)
struct guestfs_message_header (encoded as XDR)
struct guestfs_<foo>_ret (encoded as XDR)
As above the guestfs_foo_ret structure may be completely omitted
for functions that return no formal return values.
As above the total length of the reply is limited to
GUESTFS_MESSAGE_MAX.
In the case of an error, a flag is set in the header, and the reply message is slightly changed:
total length (header + error,
but not including the length word itself)
struct guestfs_message_header (encoded as XDR)
struct guestfs_message_error (encoded as XDR)
The guestfs_message_error structure contains the error message as a
string.
A FileIn parameter indicates that we transfer a file into the
guest. The normal request message is sent (see above). However this
is followed by a sequence of file chunks.
total length (header + arguments,
but not including the length word itself,
and not including the chunks)
struct guestfs_message_header (encoded as XDR)
struct guestfs_<foo>_args (encoded as XDR)
sequence of chunks for FileIn param #0
sequence of chunks for FileIn param #1 etc.
The "sequence of chunks" is:
length of chunk (not including length word itself) struct guestfs_chunk (encoded as XDR) length of chunk struct guestfs_chunk (encoded as XDR) ... length of chunk struct guestfs_chunk (with data.data_len == 0)
The final chunk has the data_len field set to zero. Additionally a
flag is set in the final chunk to indicate either successful
completion or early cancellation.
At time of writing there are no functions that have more than one FileIn parameter. However this is (theoretically) supported, by sending the sequence of chunks for each FileIn parameter one after another (from left to right).
Both the library (sender) and the daemon (receiver) may cancel the transfer. The library does this by sending a chunk with a special flag set to indicate cancellation. When the daemon sees this, it cancels the whole RPC, does not send any reply, and goes back to reading the next request.
The daemon may also cancel. It does this by writing a special word
GUESTFS_CANCEL_FLAG to the socket. The library listens for this
during the transfer, and if it gets it, it will cancel the transfer
(it sends a cancel chunk). The special word is chosen so that even if
cancellation happens right at the end of the transfer (after the
library has finished writing and has started listening for the reply),
the "spurious" cancel flag will not be confused with the reply
message.
This protocol allows the transfer of arbitrary sized files (no 32 bit
limit), and also files where the size is not known in advance
(eg. from pipes or sockets). However the chunks are rather small
(GUESTFS_MAX_CHUNK_SIZE), so that neither the library nor the
daemon need to keep much in memory.
The protocol for FileOut parameters is exactly the same as for FileIn parameters, but with the roles of daemon and library reversed.
total length (header + ret,
but not including the length word itself,
and not including the chunks)
struct guestfs_message_header (encoded as XDR)
struct guestfs_<foo>_ret (encoded as XDR)
sequence of chunks for FileOut param #0
sequence of chunks for FileOut param #1 etc.
Because the underlying channel (QEmu -net channel) doesn't have any
sort of connection control, when the daemon launches it sends an
initial word (GUESTFS_LAUNCH_FLAG) which indicates that the guest
and daemon is alive. This is what guestfs_launch waits for.
If you want to compile your own qemu, run qemu from a non-standard location, or pass extra arguments to qemu, then you can write a shell-script wrapper around qemu.
There is one important rule to remember: you must exec qemu as
the last command in the shell script (so that qemu replaces the shell
and becomes the direct child of the libguestfs-using program). If you
don't do this, then the qemu process won't be cleaned up correctly.
Here is an example of a wrapper, where I have built my own copy of qemu from source:
#!/bin/sh - qemudir=/home/rjones/d/qemu exec $qemudir/x86_64-softmmu/qemu-system-x86_64 -L $qemudir/pc-bios "$@"
Save this script as /tmp/qemu.wrapper (or wherever), chmod +x,
and then use it by setting the LIBGUESTFS_QEMU environment variable.
For example:
LIBGUESTFS_QEMU=/tmp/qemu.wrapper guestfish
Note that libguestfs also calls qemu with the -help and -version options in order to determine features.
Pass additional options to the guest kernel.
Set LIBGUESTFS_DEBUG=1 to enable verbose messages. This
has the same effect as calling guestfs_set_verbose (handle, 1).
Set the memory allocated to the qemu process, in megabytes. For example:
LIBGUESTFS_MEMSIZE=700
Set the path that libguestfs uses to search for kernel and initrd.img. See the discussion of paths in section PATH above.
Set the default qemu binary that libguestfs uses. If not set, then the qemu which was found at compile time by the configure script is used.
See also QEMU WRAPPERS above.
Set LIBGUESTFS_TRACE=1 to enable command traces. This
has the same effect as calling guestfs_set_trace (handle, 1).
Location of temporary directory, defaults to /tmp.
If libguestfs was compiled to use the supermin appliance then each
handle will require rather a large amount of space in this directory
for short periods of time (~ 80 MB). You can use $TMPDIR to
configure another directory to use in case /tmp is not large
enough.
guestfish(1), qemu(1), febootstrap(1), http://libguestfs.org/.
Tools with a similar purpose: fdisk(8), parted(8), kpartx(8), lvm(8), disktype(1).
To get a list of bugs against libguestfs use this link:
https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools
To report a new bug against libguestfs use this link:
https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools
When reporting a bug, please check:
That the bug hasn't been reported already.
That you are testing a recent version.
Describe the bug accurately, and give a way to reproduce it.
Run libguestfs-test-tool and paste the complete, unedited output into the bug report.
Richard W.M. Jones (rjones at redhat dot com)
Copyright (C) 2009 Red Hat Inc. http://libguestfs.org/
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA